JavaScript seems to be disabled in your browser.
You must have JavaScript enabled in your browser to utilize the functionality of this website.

My Cart

You have no items in your shopping cart.

01257 442911 Mon to Fri 9am-5pm, Sat 10am-4pm, Sun Closed

01257 442911 Mon to Fri 9am-5pm, Sat 10am-4pm, Sun Closed

Hello, Sign in Your Account

(0) Basket

My Cart

You have no items in your shopping cart.

Product Code DRD-SW

MHS Bespoke Multisec 4 Column Designer Radiator

20.65

*Finish

*Size (H x Section width)

* Required Fields

Prices from : £22.32 inc VAT

FREE DELIVERY ON ALL RADIATORS

Qty:

-OR-

The Multisec Bespoke range adds function and elegance to any room, thanks to its clean multi column design and high-quality construction.

These radiators can be built to the size you need, following the steps below will help you through the process

Easy guide to making your radiator steps below

Work out the heat required for you room https://www.designerradiatorsdirect.co.uk/radiator-btu-calculator
Check the BTU per section and divide this by the width of each section. This will give you with number of sections required
Select the Height
The price this shows is per section – the section is left to right
Multiply the amount of sections required by the price for the height and that will give you the price for the radiator

207 - 750mm has a maximum 40 section width

900 - 1200mm has a maximum 35 section width

1500 & 1800mm has a maximum 20 section width

2000 - 2500mm has a maximum 15 section width

If you wish to purchase feet, they can be selected from the following link, these are single so you will need to order the amount needed https://www.designerradiatorsdirect.co.uk/mhs-multisec-slip-on-foot-34280

All the valves and radiators have a 15mm inlet, if you wish to have traditional valves that in keeping with this style of radiator they can be found here https://www.designerradiatorsdirect.co.uk/traditional-radiator-valves

Why not finish the look by covering the unsightly copper pipe with the Sleeving kits to match your valves, these can be found here https://www.designerradiatorsdirect.co.uk/mhs-sleeving-kits-42742

If you would like to stick with the MHS brand, they have a selection of different valves on offer. The links to these are below

Which Valves do I need?

Choosing your radiator valves can be a little confusing here is a guide for you to find the correct valves for your radiator:

pipe work is coming out of the floor and the radiator has side connections you will need a set of Angled valves.
pipe work is coming out of the floor and the radiator has underneath connections you will need a set of Straight valves.
pipe work is coming out of the wall and the radiator has side connections you will need a set of either Angled valves or Corner valves.
pipe work is coming out of the wall and the radiator has underneath connections you will need a set of either Angled valves or Corner valves.

01257 442911 Mon to Fri 9am-5pm, Sat 10am-4pm, Sun Closed