You have no items in your shopping cart.
01257 442911 Mon to Fri 9am-5pm, Sat 10am-4pm, Sun Closed
01257 442911 Mon to Fri 9am-5pm, Sat 10am-4pm, Sun Closed
(0) Basket
You have no items in your shopping cart.
Spend £1500, use code 5OFF & get 5%OFF.
On £750, use code 2OFF & get 2%OFF
The Linton designer radiator is an old-school design cast iron radiator. Coming in a range of colours and special finishes, this radiator will comfortably fit into any Victorian or order property where a modern alternative would not suit. This radiator is built in sections to suit your individual sizing requirements.
- Comes complete with footed ends.
- Cast Iron.
- RAL 3 weeks
- Polished 5 weeks
- Burnished 4 weeks
- Polished 4 weeks
- Antique Brass 4 weeks
- Galvanic Copper 5 weeks
- 10 year guarantee.
- Heating output rated @ delta t50.
- UKCA approved
- Manufactured and certified to BS EN442
Further explained: To select your appropriate size please choose your height and using the 82mm sections in the dropdown menu, add the required amount to your basket needed to build your radiator.
Cast Iron radiators come assembled up to a maximum of 10 sections. Radiators larger than these will require on site assembly using an appropriate joining key. We will contact you once your order is placed if this is required for your order.
If you require a RAL Colour please place your order under RAL Colour. From here you will be contacted via email with the RAL chart. Take a look at the chart below:
https://www.theradiatorcompany.co.uk/product-pages/traditional-cast-iron/linton/
See our valve guide for advice on which valves you will need with this design.
Similar valves shown in picture:
https://www.designerradiatorsdirect.co.uk/faringdon-trv-angled-valve-set-antique-brass
If this item is out of stock at the time of purchase you will be contacted via email.
Which Valves do I need?
Choosing your radiator valves can be a little confusing here is a guide for you to find the correct valves for your radiator:- pipe work is coming out of the floor and the radiator has side connections you will need a set of Angled valves.
- pipe work is coming out of the floor and the radiator has underneath connections you will need a set of Straight valves.
- pipe work is coming out of the wall and the radiator has side connections you will need a set of either Angled valves or Corner valves.
- pipe work is coming out of the wall and the radiator has underneath connections you will need a set of either Angled valves or Corner valves.
01257 442911 Mon to Fri 9am-5pm, Sat 10am-4pm, Sun Closed
Have a question or need advice?
-
Quality Guarantee
Up to 20 years Guarantee available
-
Next Day Delivery
Next Day Delivery on selected radiators
-
Trade Discount
Reduced prices for Trades
-
Free Shipping
UK Mainland
