The Radiator Company Ledbury 6 Column

In stock

The Ledbury is a traditional cast iron radiator with footed ends as standard and available in a wide variety of finishes. This radiator is built in sections to suit your individual sizing requirements.

Cast Iron
20 year guarantee.
UKCA approved
Manufactured and certified to BS EN442

Further explained: To select your appropriate size please choose your height and using the 60mm sections in the dropdown menu, add the required amount to your basket needed to build your radiator.

Cast Iron radiators come assembled up to a maximum of 10 sections. Radiators larger than these will require on site assembly using an appropriate joining key. We will contact you once your order is placed if this is required for your order.

If you require a RAL Colour please place your order under RAL Colour. From here you will be contacted via email with the RAL chart. Take a look at the chart below:

https://www.theradiatorcompany.co.uk/finishes/colour-group-cast-iron/

See our valve guide for advice on which valves you will need with this design.

Similar valves shown in picture:

https://www.designerradiatorsdirect.co.uk/faringdon-trv-angled-valve-set-chrome

If this item is out of stock at the time of purchase you will be contacted via email.

Technical Info

Valve Guides

Which Valves do I need?

Choosing your radiator valves can be a little confusing, here is a guide to find the correct valves for your radiator:

If your pipe work is coming out of the floor and the radiator has side connections you will need a set of Angled valves.
If your pipe work is coming out of the floor and the radiator has underneath connections you will need a set of Straight valves.
If your pipe work is coming out of the wall and the radiator has side connections you will need a set of either Angled valves or Corner valves.
If your pipe work is coming out of the wall and the radiator has underneath connections you will need a set of either Angled valves or Corner valves.